HOBBYWINGUBEC 10A 2-6S

Hobbywing UBEC-10A (2-6S)

This UBEC is an external switching mode DC-DC regulator; it draws DC voltage from 2-6S LiPo battery, drops it to a voltage level that is suitable for your receivers and other electronic devices, and keeps providing the stable current output of up to 10Amp. As the UBEC has such a powerful output capability, so it’s particularly applicable for large helicopters and fixed-wing aircraft.

Features:

• It adopted the advanced DC-DC regulator chip with conversion efficiency exceeds 90%
• 4 options for the output voltage, applicable for all kinds of receivers/gyros/servos, etc
• It owns BEC shoot-through protection, which prevent the input voltage from directly flowing to the output end and causing damages to receivers, servos and other electronic devices
• It featured other protections like over-current protection, short-circuit protection (at the output end) and thermal protection make the use more safe and reliable
• 2 cables are connected in parallel at the output end of the UBEC, allow larger current to flow into the receiver
• It has one status LED, which lights up when the UBEC works normally
• The external switch can turn on/off the UBEC easily
• Exquisite aluminum case is helpful for heat dissipation & EMI (Electromagnetic Interference) reduction

Specs:

• Input Voltage: 6V－25.2V (2-6S LiPo)
• Output Voltage: 5.0V/6.0V/7.4V/8.4V
• Continuous Current: 10A
• Peak Current: 20A
• Dimensions: 43.1 x 32.3 x 12.5mm
• Weight: 36g